BKZLH - ACRYLIC ENAMEL, WHITE, 985-1
- MSDS: BKZLH
- Manufacturer: CORONADO PAINT COMPANY
- Product Name: ACRYLIC ENAMEL, WHITE, 985-1
- National Stock Number: 8010-00N017967
Product Identification
Product ID:ACRYLIC ENAMEL, WHITE, 985-1
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017967
MSDS Number: BKZLH
Responsible Party
EDGEWATER, FL 32032
US
Emergency Phone: 904-428-6461
Info Phone: 904-428-6461
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
PIGMENTS
Fraction By Weight: 21.7%
VEHICLE
Fraction By Weight: 31.6%
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 3.8%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 42.9%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRYING OF SKIN; EYE IRRITATION.
EXCESSIVE INHALATION MAY CAUSE ANESTHESIA, HEADACHE, DIZZINESS,
NAUSEA, UPPER RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION IF
NECESSARY. CALL PHYSICIAN. SKIN: WASH WITH MILD SOAP AND WATER,
APPLY A MILD SKIN CREAM. IN SEVERE CASES CONTACT PHYSICIAN. EYE:
FLUSH WITH WATER FOR AT LEAST 15 MIN, CALL PHYSICIAN. INGEST: CALL
PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:45.0F,7.2C
Lower Limits:1.0 %
Upper Limits:7.0 %
Extinguishing Media:FOAM, CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WASH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITIONS. USE WITH ADEQUATE VENTIALTION. AVOID PROLONGED OR
REPEATED PERSONAL CONTACT.
Other Precautions:AVOID SPARKS, HEAT, OR OPEN FLAMES. KEEP FROM
EXCESSIVE HEAT.
Exposure Controls
Respiratory Protection:ABOVE TLV, USE NIOSH/MSHA APPROVED CARTRIDGE
RESPIRATOR OR GAS MASK.
Ventilation:USE LOCAL EXHAUST SUFFICIENT TO KEEP WORKROOM CONCENTRATION
BELOW TLV.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON AND BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:235F,113C
Vapor Pres:23 @ 68 F
Vapor Density:3.2
Spec Gravity:1.14
Evaporation Rate & Reference:1.9 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE OPAQUE LIQUID; PUNGENT AROMATIC ODOR.
Percent Volatiles by Volume:60.1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO AND
CO*2.
Disposal
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.